تابعنا
فلسفتنا - "كن صادقا. كن مبتكرا."
إضافات 1400/1334
البولي إيثيلين المتصالب
Addcross1450 عبارة عن مركب MDPE مطعوم من silane ، يمكن علاجه عن طريق التعرض للظروف الرطبة ، أو تداول الماء الساخن أو التواجد في البيئة المحيطة. ويظهر خصائص قذف جيدة بمعدلات إنتاج عالية. يستخدم Addcross 1450 مع Addcross 1334 (محفز رئيسي) بنسبة 95: 5.
تُظهر المواد شديدة الارتباط التي ينتجها النظام المكون من عنصرين قوة تأثير ممتازة ، والحقوق الاقتصادية والاجتماعية والثقافية ، ومقاومة الزحف والضغط الداخلي في ظل ظروف درجات الحرارة المحيطة والمرتفعة.
تم تصميم Addcross1450 لمتطلبات ASTM F1281 لأنابيب PEX-AL-PEX متعددة الطبقات ذات ضغط الماء الساخن والبارد في الطبقة الداخلية.
تخصيص
ADDCROSS 1415/1334
البولي إيثيلين المتصالب
Addcross1415 is a silane grafted HDPE compound, curable by exposure to moist conditions, circulation of hot water or being at ambient. And shows good extrusion properties at high output rates. Addcross 1415 is used with Addcross1334 (a catalyst masterbatch) in the ratio of 95:5.Highly cross-linked materials produced by the two-component system show excellent impact strength, ESCR, creep and internal pressure resistance under ambient and elevated temperature conditions.Addcross1415 is designed for the requirements in ASTM F1281 for hot and cold water pressure multilayer PEX-AL-PEX pipes in inner layer.
تخصيص
شهادة تحليل
ADDCROSS 1450/1334
البولي إيثيلين المتصالب
Addcross1450 is a silane grafted MDPE compound, curable by exposure to moist conditions, circulation of hot water or being at ambient. And shows good extrusion properties at high output rates. Addcross 1450 is used with Addcross 1334 (a catalyst masterbatch) in the ratio of 95:5.The highly cross-linked materials produced by the two-component system show excellent impact strength, ESCR, creep and internal pressure resistance under ambient and elevated temperature conditions. Addcross1450 is designed for the requirements in ASTM F1281 for hot and cold water pressure multilayer PEX-AL-PEX pipes in inner layer.
تخصيص
إضافات 1545
البولي إيثيلين المعدل بالأنهيدريد
Addcross1545 عبارة عن مادة البولي إيثيلين المطعمة بمادة أنهيدريد المالئيك ، وهي مادة لاصقة بشكل عام للمعادن مع البولي إيثيلين ، وهذه الدرجة هي
مصمم للأنابيب متعددة الطبقات (PE / PEX-AL-PE / PEX). يحافظ Addcross 1545 على خصائص البولي إيثيلين مثل جيدة
مقاومة المذيبات الكيميائية ، مقاومة الطقس ، الأداء الميكانيكي والمعالجة.
تخصيص
ADDALLOY 3406
البولي إيثيلين المتصالب
Addalloy 3406 is Black High Density Polyethylene designed for 3-layer anti-corrosion coating application. This grade has
excellent thermal aging resistance. It contains very well dispersed, fine particle size carbon black in order to ensure
excellent weathering resistance . Addalloy 3406 contains special type of antioxidant and processing aid. It is intended for design temperature -45 to +80.
The Addalloy 3406 meets applicable requirements given below:
-ISO 21809-1
- DIN 30670
تخصيص
شهادة تحليل
ADDALLOY 3002
البولي إيثيلين المتصالب
Addalloy 3002 is used for 3LPP coating system in natural colored. It is supplied in pellets for melt extrusion.
Addalloy 3002 is a high molecular weight, high compatibility with PP adhesive, good melt flow rate and excellent physical and chemical properties polypropylene block copolymer and is recommended for steel pipe coating in the application of oil and gas transportation systems and high pressure water pipeline system.
The Addalloy 3002 application/uses: -
PP Steel Pipe Coating System
تخصيص
ADDCROSS 1501
البولي إيثيلين المتصالب
Addcross 1501 is an anhydride modified polypropylene extrudable adhesive resin. It has been designed to
develop a strong chemical bond with fusion bonded primers as an extrusion coating and laminating tie layer.
Addcross 1501 Provides excellent adhesion to Steel Pipe, polyolefins, polyamides, aluminum foil, fibers
and other. It has high thermal stability and good flexibility.
The Addcross 1501 application/uses:
- Tie-layer
- Steel Pipe Coating
تخصيص
ADDCROSS 1575
البولي إيثيلين المتصالب
Addcross 1575 is an anhydride modified polyethylene extrudable adhesive resin. It has been designed to develop a strong chemical bond with fusion bonded primers as well as top coat in three layer PE coating system. It has high thermal stability and good flexibility. It is intended for design temperature -40 to +80
The Addcross 1575 meets applicable requirements given below:
- ISO 21809-1
- DIN 30670
- IPS-G-TP-335
تخصيص
ADDCROSS 1590
البولي إيثيلين المتصالب
Addcross 1590 is an anhydride modified polyethylene extrudable adhesive resin. It has been designed to develop a strong chemical bond with fusion bonded primers as well as top coat in three layer PE coating system. It has high thermal stability and good flexibility. It is intended for design temperature -40 to +80
The Addcross 1590 meets applicable requirements given below:
- ISO 21809-1
- DIN 30670
- IPS-G-TP-335
تخصيص
إضافات 1545
Addcross1545 عبارة عن مادة البولي إيثيلين المطعمة بمادة أنهيدريد المالئيك ، وهي مادة لاصقة بشكل عام للمعادن مع البولي إيثيلين ، وهذه الدرجة هي
مصمم للأنابيب متعددة الطبقات (PE / PEX-AL-PE / PEX). يحافظ Addcross 1545 على خصائص البولي إيثيلين مثل جيدة
مقاومة المذيبات الكيميائية ، مقاومة الطقس ، الأداء الميكانيكي والمعالجة.
تخصيص
ADDCROSS 1207/1357
Addcross 1207 is a cross-linkable polyethylene compound, specially designed for Wire and Cable isolation applications and meets the requirement of the IEC 60502-1 and HD626 The Addcross 1207 base material in combination with the Addcross 1357 catalyst master-batch will accelerate the moisture-induced crosslinking reaction Addcross 1207 is based upon a low density polyethylene and contains permanent scorch retardant additives which ensure safe processing and gives a possibility to use a highly active crosslinking catalyst.
تخصيص
ADDCROSS 1230/1331
Addcross 1230 is a cross-linkable polyethylene compound, specially designed for Wire and Cable isolation applications and meets therequirement of the IEC 60502-1, BS 7655 1.3., ASTM D 1248 Type I, Class A, Category 4, HD 603 S1
Addcross 1230 base material in combination with the addcross 1331 catalyst master-batch will accelerate the moisture-inducedcrosslinking reaction Addcross 1230 is based upon a low density polyethylene and contains permanent scorch retardant additives whichensure safe processing and gives a possibility to use a highly active crosslinking catalyst. Addcross 1331 contains antioxidant and dryingagent. Addcross 1230 is used with Addcross 1331 ( a catalyst master-batch) in the ratio of 95:5
تخصيص
ADDCROSS 1250/1331
Addcross 1250 is a cross-linkable polyethylene compound, specially designed for Wire and Cable isolation applications and meets therequirement of the IEC 60502-1
The Addcross 1250 base material in combination with the addcross 1331 catalyst master-batch will accelerate the moisture-induced crosslinking reaction Addcross 1250 is based upon a low density polyethylene and contains permanent scorch retardant additives which ensure safe processing and gives a possibility to use a highly active crosslinking catalyst. Addcross 1331 contains antioxidant and drying agent.
Addcross 1250 is used with Addcross 1331 ( a catalyst master-batch) in the ratio of 95:5